How to Paint Kitchen Cabinets – Painting the Drawer fronts

How to paint kitchen cabinets is not a difficult process. You can find many ways to do it as well. In addition to the methods discussed below, you will find that you can save a lot of money on the project if you decide to take on this job yourself.

An easy way to prevent your counters, backsplash, and floors from aging is to cover them with lightweight plastic painters or rosin. A quality roll size is about 35-inch.

Paint Kitchen Cabinets

When you have completed the kitchen cabinets, you will have plenty of unused paper left over for future DIY projects. If you use your time wisely, you can probably think of more ways to use the paper you have.

Most of the time, paint removal is an easy process for any do your self. If you want to be thorough with the job, you can remove the whole cabinets.

Removing the old paint

The first step in removing the old paint from your cabinets is to clean them thoroughly. You will want to make sure that you do not damage any of the paint. If you must, you can try sanding them down before applying the new coat.

You can also buy a foam roller at the local hardware store. However, if you are trying to save money on the project, you can always purchase the cheaper electric bristle brush.

Follow the manufacturer’s direction.

When your kitchen cabinets are clean, you are ready for the second step in this process. This involves the actual painting. The best way to go about this is to follow the manufacturer’s direction for your particular paint brand.

Many brands of paint contain different instructions for how to paint a specific surface.

Prime your kitchen cabinets

For the most part, you are going to need to prime your kitchen cabinets first. This will help the paint stick and also make the surface easier to clean.

You first want to take all of the old painter’s tape and slowly pull it off the cabinets. Once this is done, you can spray the cabinets with primer.

Using large brush strokes

The next step is to apply the primer using large brush strokes. Make sure that the brush strokes match up to the wood grain of the cabinet doors.

It will help you ensure that no mistakes are made. Once you are satisfied with the primer that you have applied, it is time to start working with the paint.

Sanding the cabinet doors

When you are satisfied with the primer you have applied, it is time to start sanding the cabinet doors down. It is the best way to make sure that the color you are applying is properly applied.

Start sanding by simply using a sander, and then once you have gotten it to a nice even sanding, you can go to a heavy-duty orbital sander. There are many different brands of orbital sanders. Once you have sanded all of the ways down to the cabinet door, it is time to paint the cabinets.

Final Step

The most important step in this process is to use the same type of finish that you would on the cabinet doors. If you are not using the same type of finish, removing the hardware will be very obvious.

You will want to ensure that the new finish you are applying to the cabinets is the same finish you will put on the drawers. It will help you achieve the best overall results from this project.

Leave a Comment